| Agency Approvals | : | UL 916; CE: EN61000-6-2, EN61000-6-3, EN61000 Series, immunity, EN 61326-1; FCC Part 15 Class A; REACH, RoHS, RoHS 2 (China), RCM (Australia), ICES-003 (Canada), UKCA (UK) |
| CO2 Measurement Accuracy | : | ±30 ppm ±3% of measured value |
| CO2 Measurement Range | : | 0 to 2000/5000 ppm (selectable) |
| CO2 Measurement Repeatability | : | ±20 ppm ±1% of measured value |
| CO2 Measurement Resolution | : | 1 ppm |
| CO2 Response Time | : | <60 seconds for 90% step change |
| CO2 Sensor Type | : | Non-dispersive infrared (NDIR), diffusion sampling |
| Collection | : | Plant Room Air Quality Sensors |
| Enclosure Material | : | Polycarbonate; flammability rating UL 94 V0 |
| Humidity Calibration Certificate | : | Replaceable RH element available in 1% & 2% with NISTcalibration certificate |
| Humidity Measurement Accuracy | : | ±2% from 10 to 80% RH @ 25°C (77 °F) |
| Humidity Measurement Linearity | : | Included in accuracy specification |
| Humidity Measurement Resolution | : | 0.1% RH |
| Humidity Output Range | : | 0 to 100% RH |
| Humidity Sensor Type | : | Thin-film capacitive, replaceable |
| IP Protection | : | IP65 |
| Input Specifications | : | Class 2; 20 to 30 Vdc, 24 Vac, 50 to 60 Hz |
| Measurement Type | : | CO2 | Humidity | Temperature |
| Operating Humidity | : | 0 to 95% RH non-condensing |
| Operating Temperature | : | -25 to 70 °C (-13 to 158 °F) |
| Output Specifications | : | Selectable 4 to 20 mA, 0 to 5 V, 0 to 10 V |
| Outputs | : | Analog Output |
| Response Time | : | <60 seconds for 90% step change |
| Temperature Measurement Range | : | 0 to 50 °C (32 to 122 °F) |
| Temperature Measurement Resolution | : | 0.1 °C (0.1 °F) |
| Temperature Sensor Type | : | RTD, 1K Ohm Platinum |
| Terminal Blocks | : | Screwless terminal block with spring actuator, 16-24 AWG |
| Warranty | : | 5 years |
CD2 Series Air Quality Sensors are duct mount all-in-one sensors for monitoring air quality. The CD2 Series device combines CO2, temperature, humidity, VOC and particulate matter (PM) sensing into a single unit to ensure a building’s optimum air quality and energy efficiency. Each CD2XA2CCXdevice is an active sensor that converts a measurement into the following Analog output options: 4-20 mA, 0 to 5 Vdc or 0 to 10 Vdc
- Measurement Type: CO2/Relative Humidity/Temperature
- Temperature Sensor Type: RTD, 1K Ohm Platinum
- Temperature Measurement Accuracy: ±0.3 °C
- Analog output: 4-20 mA, 0 to 5 Vdc or 0 to 10 Vdc
- Easy to Maintain: Self Calibrating
- Easy to install: Latch on sensor cover and screwless terminal block wiring with spring actuator
- Different models are available based on application requirements for lower-cost installations.
Datasheet
