WARNING:
| Application | : | Water and Leak detection for BAS applications |
| Leak Detection Sensor Type | : | Controller |
| Model | : | LDRA6 |
| Operating Altitude | : | 15,000' (4572 m) max. |
| Operating Temperature | : | 32 - 122 °F (0 - 50 °C) |
| Outputs | : | Relay |
| Product Certification | : | CE | ETL |
| Product Type | : | Control panel |
| Range | : | Leak Detection |
| Relay Contact Ratings | : | 1 A @ 24 VDC | 0.5 A @ 120 VAC |
| Warranty | : | 2 years |
LDRA6 control panels continuously monitor up to 1000 ft of SC or SC-C detection cable per zone. If the cable detects fluid at any point along its length, the detection panel illuminates the corresponding zone LED, clearly indicating which zone is affected. Additionally, if the cable loses continuity, the panel will activate a cable fault LED. The detection sensitivity can be set independently for each zone. A summary alarm relay output is standard. The LDRA6 can interface with a computer via an RS-232 port, through which 117 days of cable current level readings and the last 100 alarms can be accessed for analysis. The LDRA6 also offers a Modbus slave port allowing other devices to communicate with it.
- Application flexibility - monitor up to 1000 ft of water leak detection cable per zone with the LDRA6
- Two LED indicators per zone, for easy troubleshooting, leak and cable fault
- Sensitivity settings for each zone reduce false alarms, maximum detection accuracy
- Fast response - summary alarm relay output
- Output versatility - alarm and trend logs of the last 100 alarms and 117 days of cable current levels, plus RS-232 and Modbus RS-485 ports
- 1200, 2400, 9600, or 19200 selectable, no parity, 8 data bits, 1 stop bit RS-232 and RS-485
- VT100 compatible (configuration) terminal emulation (RS-232)
- Slave, RTU Mode, Supports function codes 03, 04, 06 and 16 Modbus (RS-485)
- 1 for reset, quiet, and test push buttons
- Up to 6-zones, supervised, relay output, Modbus RTU
Datasheet
