800.354.8556
+1 503.598.4564
  Search
Veris Industries
 
Order Summary

There are no items in the cart.
 
Onesource Rewards
Not logged-in or not enrolled in
Veris OSR.

Click here to Log In, or Click here for information about the Veris OSR program.
Customers also ordered
Replace the element instead of the entire sensor if service is required
Waterguard for washdown applications
Home >
HN3XMSTC
HN3XMSTC $462.52 EA
Quantity:


  • Overview
  • Series Specifications
HN probe type humidity transmitters are easy to install and exceptionally accurate. Their long-term stability and trouble-free serviceability make them the best in the industry. The electronics are embedded inside the probe, protecting them from condensation-related failures. The thin-film capacitive HS sensor elements are factory calibrated using NIST traceable calibration equipment, eliminating the need for field calibration. Field replacement of the sensor element is a snap with the patented removable sensor, lowering costs and reducing downtime.

APPLICATIONS
  • Energy Management Systems
  • HVAC control for improved comfort & energy savings
  • Museums, schools, printing shops, and other locations requiring humidity control
  • Facilitating compliance with ASHRAE standards for environmental control and indoor air quality
Sense humidity in harsh environments
  • Thin-film polymer capacitive sensor element
  • Electronics are encapsulated in stainless probe to resist corrosion
  • Fully interchangeable element to 1%, 2%, 3%, or 5% accuracy. Calibration-free!
Rugged industrial design
  • Polarity insensitive, two-wire 4-20mA, or 3-wire 0-5/0-10VDC versions...flexible systems compatibility
Calibration-free interchangeable NIST traceable HS element
  • Replace digital sensor quickly without calibration...maintain accuracy and eliminate downtime
  • HS element is microprocessor profiled with on-board nonvolatile memory
  • Multi-point digital calibration to NIST standards
  • NIST certification available
  • Recovers from 100% saturation...no damage to sensor
  • HS Element Digitally profiled thin-film capacitive (32 bit mathematics) U.S. Patent 5,844,138
  • Accuracy at 25°C ±1%, 2%, 3%, or 5%(specify) @ 10 to 80% RH; Multi-point calibration, NIST traceable
  • Reset Rate* 24 hours
  • Stability ±1% @ 20°C (68°F) annually, for two years
  • Operating Humidity Range 0 to 100% RH (non-condensing)
  • Temperature Coefficient ±0.1%RH/ °C above or below 25°C (typically)
  • Analog Output 4-20mA version: 2-wire, polarity insensitive (clipped and capped); 0-5V/0-10V Versions: 3-wire, observe polarity
  • Scaling 0–100% RH
  • Operating Temperature Range -50° to 50°C(-58° to 122°F)
  • Input Power 4-20mA version: loop powered 12-30VDC only, 30mA max.; 0-5V/0-10V versions: 12-30VDC/24VAC, 15mA max.
  • Optional Temperature Transmitter Output Digital, 4-20mA, (clipped and capped) or 0-5V/0-10V output; accuracy ±0.5°C (±1%°F) typically
  • EMC Conformance - CE option EN50081-1, EN 50082-1, EN 61000-4-5, EN 61000-4-3, ENV 50204, EN 61000-4-6
  • Range 10° - 35°C (50° - 95°F)

*Reset Rate is the time required to recover the 50% RH after exposure to 90%RH for 24 hours.**Specified accuracy with 24VDC supplied power with rising humidity. RTD/Thermistors are not compensated for internal heating of product. One side of transformer secondary is connected to signal common, so an Isolation transformer or dedicated power supply may be required.Shielded cabling is required for conformance to EMC standards. Technical information is available from factory upon request.